Rockwell-automation 1440-VAD02-01RA XM-123 Aeroderivative Module Instrukcja Użytkownika Pobierz pdf (Strona 10)

Publication GMSI10-UM003D-EN-P - May 2010

XM-123 Components

The XM-123 module consists of a terminal base and an instrument module.

The XM-123 Aeroderivative module and the XM-940 Dynamic Measurement

Terminal Base are shown below.

Figure 1.1 XM-123 Module Components

• XM-940 Dynamic Measurement Module Terminal Base - A DIN rail

mounted base unit that provides terminations for all field wiring

required by XM dynamic measurement modules, including the XM-123.

• XM-123 Aeroderivative Module - The module mounts on the XM-940

terminal base via a keyswitch and a 96-pin connector. The module

contains the measurement electronics, processor, relay, and serial

interface port for local configuration.

Using this Manual

This manual introduces you to the XM-123 Aeroderivative module. It is

intended for anyone who installs, configures, or uses the XM-123

Aeroderivative module.

XM-940 Dynamic Measurement Module

Terminal Base Unit

Cat. No. 1440-TB-A

XM-123 Aeroderivative Module

Cat. No. 1440-VAD02-01RA

IMPORTANT

The XM-441 Expansion Relay module may be connected

to the XM-123 module via the XM-940 terminal base.

When connected to the module, the Expansion Relay

module simply "expands" the capability of the XM-123 by

adding four additional epoxy-sealed relays. The XM-123

controls the Expansion Relay module by extending to it the

same logic and functional controls as the on-board relay.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 165 166

Brak uwag

Rockwell-automation 1440-VAD02-01RA XM-123 Aeroderivative Module Instrukcja Użytkownika Strona 10