Rockwell-automation 1503 IntelliVAC Contactor Control Module - Series Instrukcja Użytkownika Pobierz pdf (Strona 16)

Installation a nd Wiri ng 3-3

1503-UM052D-EN-P – June 2013

OEM

The IntelliVAC may be ordered as an OEM component. This allows the

OEM to mount the components in a configuration most suitable to the

motor controller equipment layout. Care must be exercised to ensure the

IntelliVAC has adequate ventilation provided around it. Refer to Figure

3.2 for mounting the IntelliVAC. It is recommended that a minimum of

1.5 inches (38.1mm) of free air space be provided between the

IntelliVAC and any solid barrier above or below.

The OEM is responsible for controller fusing, motor overload protection,

control devices (eg. Start/Stop push buttons), and wiring between the

IntelliVAC and 1502 vacuum contactor (using optional wire harness).

Wiring and mounting for optional items, such as TDUV Capacitor, are

also the OEM’s responsibility. Refer to Figure 3.3 for basic connections.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 52 53

Brak uwag

Rockwell-automation 1503 IntelliVAC Contactor Control Module - Series Instrukcja Użytkownika Strona 16