Rockwell-automation 1734-IK Encoder/Counter Modules User Manual Instrukcja Użytkownika Pobierz pdf (Strona 60)

Publication 1734-UM006B-EN-P - August 2005

A-6 Configure Modules in RSLogix 5000 Software

3. Refer to the table to make selections for the following entries.

• Store Count Mode

• Rollover

• Preset

• Counter Attenuator

• Frequency Precision

• Gate Multiplier

• Time Base

• Actual Gate Interval

If You Selected This for Type For This Value Select Comments

Counter (default)

Encoder X1

Encoder X2

Encoder X4

Store Count

Mode

Store Count Disabled

Store-Continue

Store-Wait-Resume

Store, Reset-Wait-Start

Store, Reset-Start

Default is Store Count Disabled.

Select an option to determine which mode you use

for operating the Z Gate/Reset Terminal,

Rollover 1 to 16777216 Default is 16777215.

Select a value greater than the value for Preset.

Preset 0 to 16777215 Default is 0.

Select a value smaller than the value for Rollover.

Counter

Attenuator

0 to 255 Default is 1.

Select a value to attenuate the counter display.

Period/Rate

Rate Measurement

Frequency

Precision

X 0.0001

X 0.001

X 0.01

X 0.1

X 1

X 10

X 100

Default is X1.

Select a value to multiply the frequency by the factor

selected.

Gate Multiplier 1 to 200 Default is 1.

Select a value so that the product of Gate Multiplier

and Time Base does not exceed 3 seconds

(3000 milliseconds).

Time Base 10 to 3000 milliseconds

in multiples of 10

Default is 1000.

Actual Gate

Interval

You do not make a

selection, as this is a static

field you do not configure.

This is the product of Gate Multiplier and Time Base.

An acceptable value is less than 3 seconds

(3000 milliseconds).

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 66 67 68

Komentarze do niniejszej Instrukcji

Brak uwag

Rockwell-automation 1734-IK Encoder/Counter Modules User Manual Instrukcja Użytkownika Strona 60

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Rockwell-automation 1734-IK Encoder/Counter Modules User Manual