Rockwell-automation 1751 SynchLink Base Block Installation Instruction Instrukcja Użytkownika Pobierz pdf (Strona 3)

SynchLink Base Block 3

Publication 1751-IN001A-EN-P - March 2001

SynchLink Overview

We designed the SynchLink system to provide the synchronization and coordination

of drive and motion control applications that are based on ControlLogix™ and

PowerFlex 700s™ stations.

About the SynchLink Base Block

The base block converts optical signals coming from a SynchLink station to

electrical signals, and then re-times and retransmits them simultaneously to a

maximum of four 4-port splitter blocks. It also supplies power to splitter blocks.

The base block requires a 24V dc power supply. The power supply connection is

made via field wiring to a screw connector plug. The base block is DIN

rail-mounted and is housed in a two-piece plastic enclosure. Figure 1 identifies the

components of the base block.

Figure 1 - Components of the base block

Indicators

+24V dc

(pin 4)

24V dc

Common

(pin 3)

Not Connected

(pins 1 and 2)

Module locking tab

Fiber Optic Receiver

Backplane Connector

31202-M

Protective cap

1 2 3 4 5 6 7 8 ... 15 16

Brak uwag

Rockwell-automation 1751 SynchLink Base Block Installation Instruction Instrukcja Użytkownika Strona 3