Rockwell-automation 1761-HHMK64 Hand-Held Programmer Memory Module Instrukcja Użytkownika Strona 1

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Ekwipunek Rockwell-automation 1761-HHMK64 Hand-Held Programmer Memory Module. Rockwell Automation 1761-HHMK64 Hand-Held Programmer Memory Module User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 2
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
1
Hand-Held Programmer Memory Module
(Catalog Numbers 1761–HHM–K08 and 1761–HHM–K64)
Installation Instructions
Optional Memory Modules
Two memory module
s a
r
e a
vailable for th
e H
and–Held Programmer (HHP):
The 8 Kbyte memory module, 1761–HHM–K08, stores at least one program.
The 64 Kbyte memory module, 1761–HHM–K64, stores at least eight
programs.
The memory module compartment is located in the back of the HHP.
!
ATTENTION: Always remove power from the HHP before inserting
the memory module. This guards against possible damage to the
module, as well as undesired controller faults.
!
ATTENTION: To avoid potential damage to the memory modules,
handle them by the ends of the carrier or edges of the plastic housing.
Skin oil and dirt can corrode metallic surfaces, inhibiting electrical
contact. Also, do not expose memory modules to surfaces or areas that
may typically hold an electrostatic charge. Electrostatic char
ges can
alter or destroy memory.
Refer to the next page for installing the memory module.
Przeglądanie stron 0
1 2

Podsumowanie treści

Strona 1 - Optional Memory Modules

1Hand-Held Programmer Memory Module(Catalog Numbers 1761–HHM–K08 and 1761–HHM–K64)Installation InstructionsOptional Memory ModulesTwo memory modules a

Strona 2 - Installing the Memory Module

Installation InstructionsHand-Held Programmer MemoryModule2cInstalling the Memory Module1.If the HHP is connected to the controller, remove the cable

Komentarze do niniejszej Instrukcji

Brak uwag