Rockwell-automation 1762-OF4 MicroLogix Analog Output Module Instrukcja Użytkownika Pobierz pdf (Strona 19)

Analog Output Module 19

Publication 1762-IN016D-EN-P - June 2013

General

Attribute Value

Dimensions, HxWxD 90 x 40.4 x 87 mm

(3.54 x 1.59 x 3.43 in.)

Approximate shipping weight

(with carton)

235 g (8.28 oz)

Bus current draw, max 40 mA @ 5V DC

165 mA @ 24V DC

Analog normal operating range Voltage: 0…10V DC

Current: 4…20 mA

Full scale

(1)

analog ranges

(1)

The over- or under-range flag comes on when the normal operating range (over/under) is exceeded. The module continues

to convert the analog output up to the maximum full scale range.

Voltage: 0…10.5V DC

Current: 0…21 mA

Resolution 12 bits (unipolar)

Repeatability

(2)

Repeatability is the ability of the output module to reproduce output reading when the same controller value is applied to it

consecutively, under the same conditions and in the same direction.

±0.12%

Output group to system isolation

30V AC/30V DC rated working voltage

(4)

(IEC Class 2 reinforced insulation)

type test: 500V AC or 707V DC for 1 minute

(4)

Rated working voltage is the maximum continuous voltage that can be applied at the terminals with respect to earth

ground.

Module power LED On: indicates power is applied.

Recommended cable Belden 8761 (shielded)

Heat Dissipation 2.8 W

Wiring category

(3)

Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and

Grounding Guidelines, publication 1770-4.1

2 - on signal ports

Pilot duty rating Not rated

Enclosure type rating IP20

North American temp code T3C

Vendor ID code 1

Product type code 10

Product code 66

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Komentarze do niniejszej Instrukcji

Brak uwag

Rockwell-automation 1762-OF4 MicroLogix Analog Output Module Instrukcja Użytkownika Strona 19

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Rockwell-automation 1762-OF4 MicroLogix Analog Output Module