Rockwell-automation 1762-OW8 MICROLOGIX RELAY OUTPUT MODULE Instrukcja Użytkownika Pobierz pdf (Strona 6)

6 MicroLogix 1762-OW8 Relay Output Module

Publication 1762-IN003B-EN-P - June 2013

Use DIN rail end anchors (Allen-Bradley part number 1492-EA35 or 1492-EAH35) for

vibration or shock environments.

Panel Mounting

Use the dimensional template shown below to mount the module. The preferred mounting

method is to use two M4 or #8 panhead screws per module. M3.5 or #6 panhead screws may also

be used, but a washer may be needed to ensure a good ground contact. Mounting screws are

required on every module.

TIP

For environments with greater vibration and shock concerns, use the panel

mounting method described below, instead of DIN rail mounting.

End Anchor

MicroLogix 1200

Controller

MicroLogix 1200

Expansion I/O

MicroLogix 1200

Expansion I/O

MicroLogix 1200

Expansion I/O

(3.54)

100

(3.94)

40.4

(1.59)

40.4

(1.59)

14.5

(0.57)

For more than 2 modules: (number of modules - 1) x 40 mm (1.58 in.)

NOTE: All dimensions are in mm (inches). Hole spacing

tolerance: ±0.4 mm (0.016 in.).

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Brak uwag

Rockwell-automation 1762-OW8 MICROLOGIX RELAY OUTPUT MODULE Instrukcja Użytkownika Strona 6