Rockwell-automation 1784-KTCS ControlNET Scanner Installation Instruct Instrukcja Użytkownika Pobierz pdf (Strona 22)

22 ControlNet Scanner Card

Publication

1784-5.35 – April 1999

Figure 3

KTCS

card connector

1784KTCS

Network Access Port (NAP)

RJ-45 connector for connecting programming

terminals to devices on a ControlNet network

Channel A

BNC connectors for connecting directly to a

ControlNet network

Channel B

Redundant media

BNC connectors

Diagnostic status

indicators

TIP: The light icon is channel A;

the dark icon is channel B.

ATTENTION: Do not use the card to connect to more than one

network at a time. Attempting to connect to a second network will

cause your communication system to operate erratically.

See page 26 for information about status indicators. Indicators diagnose only

redundant media BNC connections.

Important: If you are using a non-redundant cabling system, all ControlNet

devices must be on the same channel, channel

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Brak uwag

Rockwell-automation 1784-KTCS ControlNET Scanner Installation Instruct Instrukcja Użytkownika Strona 22