Rockwell-automation 1784-KTS_KTX_KTXD User Manual Communication Interf Instrukcja Użytkownika Pobierz pdf (Strona 81)

Run the 1784-KTx Diagnostics for DOS B-17

1784-6.5.22 - November 1999

3. Use the decision table below for both protocols.

4. Press F4 to enable the card.

If everything is operating successfully, you see the message:

•

DH+ Enabling Test . . . . . ENABLED for DH+

•

DH485 Enabling Test . . . . . ENABLED for DH-485

5. Press F6 to view the card’s information.

For DH+

To: Press this key:

enable the KT

card on a DH+ or DH-485 link (page B-17) F4 Enable

disable the KT

card from a DH+ or DH-485 link (disables the card

from the network but protocol is not removed from the card)

F5 Disable

display the KT

car d on DH+ or DH-485 link F6 Display

clear the memory location of the KT

card

• disables card from the DH+ or DH-485 link

• clears the DH+ or DH-485 protocol from the card

F7 Clear

return to the main menu (page B-7

)

F10 Return

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 95 96

Brak uwag

Rockwell-automation 1784-KTS_KTX_KTXD User Manual Communication Interf Instrukcja Użytkownika Strona 81