Rockwell-automation 1784-PM02AE PCI 2 Axis Servo Card Instrukcja Użytkownika Pobierz pdf (Strona 9)

PCI 2 Axis Servo Card 9

Publication 1784-IN005B-EN-P- July 2002

Access the Computer’s PCI Local Bus Expansion Slots

To install the card, you must access the computer’s PCI local bus

expansion slots. Follow these general steps, or refer to your

computer’s user guide for instructions on how to:

1. Turn off the power to the host computer with the power

switch.

2. Remove the computer’s cover.

3. Select a vacant PCI local bus expansion slot. Make sure the

vacant slot is on the main PCI Bus.

4. Remove the slot’s expansion cover. Remove the screw on the

back (rear bracket) of the computer.

Insert the Card

To insert the card inside the computer:

1. Follow the card handling instructions on page 6.

2. Push the card’s PCI connection into the PCI Bus.

If you have additional cards to install, repeat steps 1 and 2 for each

card. After the cards (up to four) are installed, use the Sync cable

(1784-PMCSY4) to connect all of the cards.

3. Replace and tighten the expansion slot screw.

4. Turn on the computer to make sure it comes up correctly.

If the computer then:

powers up go to step 5.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Brak uwag

Rockwell-automation 1784-PM02AE PCI 2 Axis Servo Card Instrukcja Użytkownika Strona 9