Rockwell-automation 1792-IB16LP INSTL INSTR 16 INPUT MODULE Instrukcja Użytkownika Pobierz pdf (Strona 4)

ArmorBlock-LP 16 Input Module4

Publication 1792-5.6 – September 1997

Connect the Wiring to the ArmorBlock Module

This module uses quick disconnect, screw-on style connectors for:

• I/O input wiring

• the DeviceNet connector

30197–M

Eight 5-pin Input Micro-connectors

5-pin DeviceNet Mini-connector

Seven micro plugs are included with your module. Use these plugs to

cover and seal unused ports. Pinout diagrams for these connectors are

shown below.

ATTENTION: Make sure all connectors are securely

tightened to properly seal the connections against leaks and

maintain IP67 requirements.

Connecting the Input Wiring

Connect input wiring to the micro-connectors which screw into mating

connectors on the front of the block.

Make connections as shown below.

I/O Input Micro-Connector

Pin 1 = Sensor Source Voltage Positive

Pin 2 = Signal B

Pin 3 = Negative/Return

Pin 4 = Signal A

(View into socket)

Pin 5 = Ground

Use a splitter cable (or “Y” cable) to access signal B.

1 2 3 4 5 6 7 8 9 10

Brak uwag

Rockwell-automation 1792-IB16LP INSTL INSTR 16 INPUT MODULE Instrukcja Użytkownika Strona 4