Rockwell-automation 1799ER-IQ10XOQ10 Dual-Port EtherNet Embedded I/O B Instrukcja Użytkownika Pobierz pdf (Strona 14)

14 Dual-Port EtherNet Embedded I/O Board with 10 Inputs/ 10 Outputs

Publication 1799ER-IN001B-EN-P - May 2013

Communicate with Your Module

Refer to this section only if you are not using RSLogix5000 to communicate with your

I/O board.

This board’s I/O is exchanged through a cyclic, or change-of-state connection.

Cyclic — The block will produce and consume its I/O cyclically at the rate configured.

Change-of-State — Productions occur when an input changes or a fault condition occurs.

If no input or fault condition change occurs within the expected packet rate, a heartbeat

production occurs. This heartbeat production tells the connection originator that the

I/O board is alive and ready to communicate. Consumption occurs when data changes and

the connection originator produces new output data to the I/O block.

Network

status

Off The device is not initialized or the module does not have an IP

address.

Flashing green The device has no connections.

The device has an IP address, but no onnections

are established.

Green The device is online, has an IP address, and connections are

established.

Flashing red One or more connections have timed out.

Red The module has detected that its IP address is already in use.

Flashing

red/green

The module is performing a powerup self-test.

Module

status

Off No power applied to device.

Flashing green Device needs commissioning.

Green Device operating normally.

Flashing red Recoverable fault.

Red Unrecoverable fault – may require device replacement.

Expansion Module connection may be lost. Cycle power to the base

module.

Indicator Status

Status Description

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Brak uwag

Rockwell-automation 1799ER-IQ10XOQ10 Dual-Port EtherNet Embedded I/O B Instrukcja Użytkownika Strona 14