Rockwell-automation 20-COMM-I Interbus Adapter Instrukcja Użytkownika Pobierz pdf (Strona 22)

2-6 Installing the Adapter

1. Close the door or reinstall the cover on the drive. Key status

indicators can be viewed on the front of the drive after power has

been applied.

Note: Interbus compliance requires different LED functions than what is

normally displayed on the front of the drive (Port, Mod, Net A, and Net

B Leds). LED labels are provided with the adapter for application to the

drive cover.

2. Apply power to the PowerFlex drive. The adapter receives its power

from the connected drive. When you apply power to the product for

the first time, the status indicators should be green or off after

initialization. Refer to Chapter

7, Troubleshooting for more

information.

3. Apply power to the master device and other devices on the network.

Applying Power

ATTENTION: Risk of equipment damage, injury, or death exists.

Unpredictable operation may occur if you fail to verify that parameter

settings and switch settings are compatible with your application.

Verify that settings are compatible with your application before

applying power to the drive.

20COMM-UM007A-EN-P.book Page 6 Tuesday, January 22, 2002 10:52 AM

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 117 118

Brak uwag

Rockwell-automation 20-COMM-I Interbus Adapter Instrukcja Użytkownika Strona 22