Rockwell-automation 20P PowerFlex DC Drive - Frame A SCR Modules for D Instrukcja Użytkownika Pobierz pdf (Strona 12)

12 PowerFlex® DC Drive - Frame A SCR Modules for Drives with a Power Traces Circuit Board

6. Remove the appropriate gate leads (refer to Figure 1 on page 10 for

location):

– For regenerative drives, remove each pair of (orange and yellow) gate

lead cables from connectors KG01…KG06 and KG1…KG6 and push

each lead through the appropriate opening in the board.

– For non-regenerative drives, remove each pair of (orange and yellow)

gate lead cables from connectors KG01…KG06 and push each lead

through the appropriate opening in the board.

Important: Remove the gate leads by grasping the connector and

pulling up. DO NOT pull the gate leads off by pulling on

the wires.

7. Remove the cable from connectors XTA on the Pulse Transformer

board (refer to Figure 1 on page 10

for location).

Remove cable

from XTA

For regenerative

drives, remove 12

gate leads and

push through holes

in board

Remove cable

from XTA

For non-regenerative

drives, remove six

gate leads and push

through holes in

board

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Brak uwag

Rockwell-automation 20P PowerFlex DC Drive - Frame A SCR Modules for D Instrukcja Użytkownika Strona 12