Rockwell-automation 20P-RES-A0 PowerFlex DC Drive Resolver Feedback Op Instrukcja Użytkownika Pobierz pdf (Strona 11)

Rockwell Automation Publication 20P-IN071B-EN-P - June 2011 11

PowerFlex

DC Drive Resolver Feedback Option Module

4. Secure the resolver feedback board to the stand-offs using three screws

with captive washers. Tightening torque is 0.7 N•m (6.2 lb•in).

Step 5: Wire the

Resolver Interface and

Feedback Boards

Wiring the Resolver Interface Board

Table 1 - Resolver Interface Board TB1 Wire Size and Tightening Torque

Terminal block TB1 on the resolver interface (bottom) board provides

connection points for an external 24V DC power supply input, resolver feedback

board voltage status output and resolver feedback board reset input. Tabl e 2 on

page 12 details the connections.

The resolver feedback module can be powered via an internal or external

(customer-supplied) 24V supply. The voltage source is selected by switch S2 on

the resolver interface board. See Figure 3 on page 13

for the location of switch S2.

The customer-supplied, external 24V power supply is only needed when using

the resolver interface board with a PowerFlex DC frame A drive or Stand-Alone

Regulator under the following conditions.

• A resolver is wired to the resolver feedback board (terminal block P1)

• A digital encoder is wired to the control board

• The frame A drive has a fan(s)

S15

XP3

P2 P3

XRE

TB1 TB2

P2 P3

Install screws

Resolver feedback board

Wire Size and Type

Tightening Torque N

•m (lb•in)Flexible (mm

) Multi-core (mm

)AWG

0.140…1.500 0.140…1.500 26…16 0.4 (3.5)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Brak uwag

Rockwell-automation 20P-RES-A0 PowerFlex DC Drive Resolver Feedback Op Instrukcja Użytkownika Strona 11