Rockwell-automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL Instrukcja Użytkownika Pobierz pdf (Strona 11)

Installing the Software

Chapter 3

3–2

Computer with 1 Hard and 1 Floppy or Micro Disk Drive

This section shows how to install the DL20 Offline Programming Software

on a personal computer with 1 hard drive and 1 floppy or micro disk drive.

The installation procedure creates a DL20 subdirectory for storing the

programming software (DL20.EXE) and all other DL20 files created with

the software.

The prompts and responses you see below will be identical or similar to what

you see on your computer display.

1. Turn on your computer. Your computer will display the currently active

drive: A, B or C. For example:

C:>

2. Create a DL20 subdirectory on your hard drive using the MD command.

C:> MD \DL20 [Enter]

C:>

3. Move to the new DL20 subdirectory using the CD command.

C:> CD \DL20 [Enter]

C:\DL20>

4. Insert the appropriate installation disk for the DL20 Offline Programming

Software into the floppy drive.

5. Type the following command line to copy the DL20 Programming

Software into the DL20 subdirectory.

C:\DL20> COPY A:DL20.EXE [Enter]

1 file(s) copied

The DL20 Programming Software is now installed on your hard drive.

6. Remove the installation disk from the floppy drive and store it in a

safe place.

See page 3–5 for details on initial startup.

Installing

the

DL20

Programming Software

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 66 67

Brak uwag

Rockwell-automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL Instrukcja Użytkownika Strona 11