Rockwell-automation 2711E-ND7 PanelView File Transfer Utility User Man Instrukcja Użytkownika Pobierz pdf (Strona 64)

4–2 Downloading 1000e/1200e/1400e Application Files

To prepare the PanelView terminal for a serial download:

1. Using the hardware keyswitch or the Goto Configure Mode

button, switch the PanelView terminal to the Configure mode.

2. In the Terminal Configuration screen, choose the Transfer Setup

button to display the Transfer Setup screen.

3. To change the settings, choose the Baud Rate, Parity, or Error

buttons to move the check mark to the setting you want.

• Baud RateĊThe speed at which data is transmitted over the

serial cable. The default setting for a serial transfer is

9600 baud.

• ParityĊUsed to check for accurate transmission of the data

between the development computer and terminal. The default

setting is None.

• ErrorĊUsed to check for errors in the data transmission.

Error checking is either

CRCĊcyclical (or cyclic) redundancy check.

BCCĊblock check character. BCC is the default setting.

The settings that are defined in the Transfer Setup screen must

match the Transfer Utility’s settings.

4. When you have selected the required settings, choose OK to exit

this screen.

5. To download an application serially, in the Terminal

Configuration screen, choose the Transfer Application button to

display the Transfer Application screen.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 108 109

Brak uwag

Rockwell-automation 2711E-ND7 PanelView File Transfer Utility User Man Instrukcja Użytkownika Strona 64