Rockwell-automation 2711E-NK5 Replacing the PanelView 1400E Keypad Fac Instrukcja Użytkownika Pobierz pdf (Strona 7)

Replacing the PanelView 1400e Keypad Faceplate 7

4. Holding the faceplate in position with one hand, start the middle

screw on one side of the faceplate. Tighten it “finger-tight”, that

is, as tight as you can by hand.

Important: Start these screws very carefully, either by hand

or with a screwdriver; it is very important not to

strip the threads in the screw holes. If you

should strip or cross-thread a hole, it may be

necessary to return the unit for service.

5. Start the middle screw on the other side of the faceplate and

“finger tighten”.

6. Place the terminal on its face.

1 2 3 4 5 6 7 8 9 10 11

Brak uwag

Rockwell-automation 2711E-NK5 Replacing the PanelView 1400E Keypad Fac Instrukcja Użytkownika Strona 7