Rockwell-automation 2711P PanelView Plus Terminal User Manual Instrukcja Użytkownika Pobierz pdf (Strona 150)

150 Publication 2711P-UM001J-EN-P - November 2009

Chapter 6 Install and Replace Components

5. Push down on the communication module until the connector is

firmly seated.

6. Tighten the three captive screws that secure the module to the

terminal, starting with the bottom, left screw on the module.

Tighten screws to a torque of 0.34…0.45 Nm (3…4 lb•in).

Follow these steps to replace a communication module.

1. Disconnect power from the terminal.

2. Disconnect the communication cables from the module.

3. Loosen the three screws that secure the communication module

to the terminal.

4. Carefully lift the communication module away from the terminal

and set aside.

5. Install the new communication module.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 245 246

Brak uwag

Rockwell-automation 2711P PanelView Plus Terminal User Manual Instrukcja Użytkownika Strona 150