Rockwell-automation 6189V-xxxx Non-display Industrial Computers User M Instrukcja Użytkownika Pobierz pdf (Strona 50)

50 Rockwell Automation Publication 6177R-UM002D-EN-P - October 2014

Chapter 4 Component Replacement

12. Disconnect the two SATA cables from the HDD assembly.

13. Remove the PSU.

14. Install the new PSU in the reverse order of the removal steps.

a. Step 11: Torque the five screws to 1.4 N•m (12 lb•in) to secure the

new PSU.

b. Step 4: Reinstall the chassis cross member or I/O card retention

bracket as detailed in Install I/O Card Retention Bracket

on page 98.

c. Verify that all cables are properly connected before you reinstall the

cover.

d. Remove and replace any cut cable ties.

15. Follow the steps for Post-configuration

on page 37.

IMPORTANT

Mark each SATA cable so that you can reconnect them to the correct

port after you install the new PSU.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 107 108

Komentarze do niniejszej Instrukcji

Brak uwag