Rockwell-automation 842E CM Integrated Motion Encoder on EtherNet/IP Instrukcja Użytkownika Pobierz pdf (Strona 37)

Rockwell Automation Publication 842E-UM002A-EN-P - November 2013 37

Configuring the 842E-CM Encoder Using the Logix Designer Application Chapter 5

5. Click Apply.

6. Select the Master Feedback category; the Master Feedback

specification dialog box opens.

7. Select Type: Hiperface. This is currently the only choice for Type.

8. Set the resolution for the encoder; set the number of turns as

appropriate to your encoder. The effective resolution should be

displayed. The configuration for multi-turn is shown below. For

single turn, Turns should be 1.

9. Click Apply.

10. Select the Scaling category and edit the default values as

appropriate to your application. If you make changes, click Apply.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 63 64

Brak uwag

Rockwell-automation 842E CM Integrated Motion Encoder on EtherNet/IP Instrukcja Użytkownika Strona 37