Rockwell-automation 1441-DYN25-Z Dynamix 2500 Data Collector Instrukcja Użytkownika Pobierz pdf (Strona 175)

Rockwell Automation Publication 1441-UM001B-EN-P - September 2012 175

Multi-channel Measurements Chapter 6

12. Move to an empty row in the Location pane and choose Edit > Paste to

paste the new measurement definition into the spreadsheet.

13. Edit the new location.

Make sure you change the Location ID and set Lo. Channel to 2.

14. Now include these locations in a list.

You can create a new list or recall the current list. The locations must be

tagged to create a group list.

15. Double-click the Group column in the Location pane to add the two

locations to a group list.

The current group numbers appears in the Group column.

16. Assign the locations the same group number. The group is then loaded

with the list to the Dynamix 2500 data collector.

Figure 7 - Typical Orbit Measurement Setup.

17. Connect the data collector to the computer and load the list to the

Dynamix 2500 data collector.

See Loading Lists to the Data Collector on page 113

for details.

18. Select the route and collect the orbit measurement.

See Collect Orbit Measurements on page 178

See Select a Route on page 131

assistance in selecting a route.

Filter selection is crucial to collecting

proper data. An Overall filter is

recommended for analyzing all

frequencies. A 1st Order is recommended

for isolating anomalies related only to

unbalance.

IMPORTANT

To view the orbit measurements in an orbit plot in the Emonitor

software, you must enter the orientation of the sensors from

which data is being collected for each channel in the Lo.

Sensor Orientation column.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 217 218

Brak uwag

Rockwell-automation 1441-DYN25-Z Dynamix 2500 Data Collector Instrukcja Użytkownika Strona 175