Rockwell-automation 1734-OA4, Series C POINT I/O 120/220V AC Output Mo Instrukcja Użytkownika Pobierz pdf (Strona 17)

POINT I/O 120/220V AC Output Module 17

Publication 1734-IN009E-EN-E - March 2013

Indicator Status for Modules

Status Description Recommended Action

Module status Off No power applied to device. Apply power to device.

Green Device operating normally. None.

Flashing green Device needs commissioning

due to missing, incomplete, or

incorrect configuration.

Configure device properly.

Flashing red Recoverable fault. 1. Cycle power to device.

2. If condition persists, replace

device.

Red Unrecoverable fault – may

require device replacement.

Replace device.

Flashing red/green Device is in self-test mode. None.

Network status Off Device is not online:

- Device has not completed

dup_MAC-id test.

- Device not powered – check

module status indicator.

Apply power to device, wait for

MAC_id to complete and correct

as needed.

Flashing green Device is online but has no

connections in the established

state.

None – device is in Idle or

Program mode.

Green Device is online and has

connections in the established

state.

None.

Flashing red One or more I/O connections are

in timed-out state.

Check for I/O module failure and

correct as needed.

Red Critical link failure – failed

communication device. Device

detected error that prevents it

from communicating on the

network.

Verify that adapter and terminal

bases are properly installed and

reinstall as needed.

Flashing red/green Communication faulted device –

the device has detected a

network access error and is in

communication faulted state.

Device has received and

accepted an Identity

Communication Faulted Request

– long protocol message.

Verify that adapter is properly

installed and reinstall as

needed.

I/O status Off All outputs inactive. None.

Yellow One or more outputs are active

and under control.

None.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Komentarze do niniejszej Instrukcji

Brak uwag

Rockwell-automation 1734-OA4, Series C POINT I/O 120/220V AC Output Mo Instrukcja Użytkownika Strona 17

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Rockwell-automation 1734-OA4, Series C POINT I/O 120/220V AC Output Mo