Rockwell-automation 1734-SSI POINT I/O Synchronous Serial Interface En Instrukcja Użytkownika Pobierz pdf (Strona 5)

POINT I/O Synchronous Serial Interface Absolute Encoder Module 5

Publication 1734-IN581D-EN-E - January 2014

European Hazardous Location Approval

European Zone 2 Certification. The following applies when the product bears the

Ex Marking.

This equipment is intended for use in potentially explosive atmospheres as defined by

European Union Directive 94/9/EC.

DEMKO certifies that this equipment has been found to comply with the Essential Health

and Safety Requirements relating to the design and construction of Category 3 equipment

intended for use in Zone 2 potentially explosive atmospheres, given in Annex II to this

Directive.

Compliance with the Essential Health and Safety Requirements has been assured by

compliance with EN 60079-15.

ATTENTION: This equipment is not resistant to sunlight or other sources of

UV radiation.

WARNING: This equipment shall be mounted in an ATEX certified enclosure

with a minimum ingress protection rating of at least IP54 (as defined in

IEC60529) and used in an environment of not more than Pollution Degree 2 (as

defined in IEC 60664-1) when applied in Zone 2 environments. The enclosure

must utilize a tool removable cover or door.

WARNING: This equipment shall be used within its specified ratings defined

by Rockwell Automation.

WARNING: Provision shall be made to prevent the rated voltage from being

exceeded by transient disturbances of more than 140% of the rated voltage

when applied in Zone 2 environments.

WARNING: Secure any external connections that mate to this equipment by

using screws, sliding latches, threaded connectors, or other means provided

with this product.

WARNING: Do not disconnect equipment unless power has been removed or

the area is known to be nonhazardous.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Brak uwag

Rockwell-automation 1734-SSI POINT I/O Synchronous Serial Interface En Instrukcja Użytkownika Strona 5