Rockwell-automation 1738-ADNX ArmorPoint DeviceNet Adapters, Series A Instrukcja Użytkownika Strona 1

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Ekwipunek Rockwell-automation 1738-ADNX ArmorPoint DeviceNet Adapters, Series A. Rockwell Automation 1738-ADNX ArmorPoint DeviceNet Adapters, Series A User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 16
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
Installation Instructions
ArmorPOINT I/O DeviceNet Adapters
Catalog Numbers 1738-ADN12, 1738-ADN18, 1738-ADN18P,
1738-ADNX, Series A
Topic Page
Important User Information 2
Environment and Enclosure 3
Prevent Electrostatic Discharge 3
About the Adapter 4
Mount the I/O Base 5
Install the Adapter 6
Set the Network Address 7
Wire the Adapter 8
Interpret Status Indicators 10
Specifications 13
Przeglądanie stron 0
1 2 3 4 5 6 ... 15 16

Podsumowanie treści

Strona 1 - Installation Instructions

Installation InstructionsArmorPOINT I/O DeviceNet AdaptersCatalog Numbers 1738-ADN12, 1738-ADN18, 1738-ADN18P, 1738-ADNX, Series ATopic PageImportant

Strona 2 - Important User Information

10 ArmorPOINT I/O DeviceNet Adapters Publication 1738-IN014D-EN-E - December 2010Interpret Status IndicatorsThis module has the following status in

Strona 3 - Environment and Enclosure

ArmorPOINT I/O DeviceNet Adapters 11Publication 1738-IN014D-EN-E - December 2010DeviceNet status Off Device is not online:- Device attempting to A

Strona 4 - About the Adapter

12 ArmorPOINT I/O DeviceNet Adapters Publication 1738-IN014D-EN-E - December 2010System power Off Not active – field power is off or DC-DC converte

Strona 5 - Mount the I/O Base

ArmorPOINT I/O DeviceNet Adapters 13Publication 1738-IN014D-EN-E - December 2010Specifications Attributes ValueExpansion I/O capacity 63 mo

Strona 6 - Install the Adapter

14 ArmorPOINT I/O DeviceNet Adapters Publication 1738-IN014D-EN-E - December 2010Power Supply SpecificationsAttributes ValueInput voltage rating, n

Strona 7 - Set the Network Address

ArmorPOINT I/O DeviceNet Adapters 15Publication 1738-IN014D-EN-E - December 2010Mounting base screw torque M4 (#8) screw 0.86 Nm (7.5 lb-in) in Al

Strona 8 - 1738-ADN18, 1738-ADN18P

Publication 1738-IN014D-EN-E - December 2010Supersedes Publication 1738-IN014C-EN-E - December 2009 Copyright © 2010 Rockwell Automation, Inc. All rig

Strona 9 - Auxiliary Power

2 ArmorPOINT I/O DeviceNet Adapters Publication 1738-IN014D-EN-E - December 2010Important User InformationSolid state equipment has operational cha

Strona 10 - Interpret Status Indicators

ArmorPOINT I/O DeviceNet Adapters 3Publication 1738-IN014D-EN-E - December 2010Environment and EnclosureFollow these guidelines for environment an

Strona 11 - Indicator Status

4 ArmorPOINT I/O DeviceNet Adapters Publication 1738-IN014D-EN-E - December 2010About the AdapterThe ArmorPOINT I/O family of DeviceNet adapters sh

Strona 12

ArmorPOINT I/O DeviceNet Adapters 5Publication 1738-IN014D-EN-E - December 2010Mount the I/O BaseMount the I/O base on a wall or panel, use the sc

Strona 13 - Specifications

6 ArmorPOINT I/O DeviceNet Adapters Publication 1738-IN014D-EN-E - December 2010Install the mounting as follows:1. Lay out the required points as s

Strona 14 - General Specifications

ArmorPOINT I/O DeviceNet Adapters 7Publication 1738-IN014D-EN-E - December 2010Remove the Adapter From the Mounting BaseFollow the instructions to

Strona 15 - Environmental Specifications

8 ArmorPOINT I/O DeviceNet Adapters Publication 1738-IN014D-EN-E - December 2010minor fault occurs, which is indicated by a flashing red Adapter St

Strona 16 - Certifications

ArmorPOINT I/O DeviceNet Adapters 9Publication 1738-IN014D-EN-E - December 2010Auxiliary PowerAttach the mini-style 4-pin connector to the mini-st

Komentarze do niniejszej Instrukcji

Brak uwag