Rockwell-automation 1756-EWEB ControlLogix EtherNet/IP Web Server Modu Instrukcja Użytkownika Pobierz pdf (Strona 26)

26 EtherNet/IP Web Server Module

Publication

1756-IN588A-EN-P - February 2004

Link Status Indicator

The Link Status LED provides the following information:

OK Status Indicator

The OK Status LED provides the following module information:

Where to Find More Information on Configuring the Module

For more details on configuring your web server module, refer to the

EtherNet/IP Web Server Module User Manual, publication ENET-UM527A.

State Status Description

Off No data transmission Module is not ready to communicate.

Green Ready Module is ready to communicate.

Flashing Green Data transmission in

progress

Module is communicating over the

network.

State Status Description

Off No Power Module does not have 24V DC power.

Verify there is chassis power and the

module is completely inserted into

chassis and backplane.

Flashing Green Standby Module is not configured.

Green Operational Module is operating correctly.

Flashing Red Minor Fault A recoverable fault has been detected.

This could be caused by an error in the

configuration.

Red Major Fault An unrecoverable fault has been

detected. Recycle power to the module.

If this does not clear the fault, replace

the module.

Flashing Red and Green Self Test Module performing power-up self-test.

1 2 ... 21 22 23 24 25 26 27 28 29 30

Brak uwag

Rockwell-automation 1756-EWEB ControlLogix EtherNet/IP Web Server Modu Instrukcja Użytkownika Strona 26