Rockwell-automation 1771-IVN Installation Data dc (10-30V) Input Modul Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Ekwipunek Rockwell-automation 1771-IVN Installation Data dc (10-30V) Input Modul. Rockwell Automation 1771-IVN Installation Data dc (10-30V) Input Module User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 12
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
Publication 1771-IN035B-EN-P - July 2002
DC (10-30V) Input Module
Cat. No. 1771-IVN Series C
Use this document as a guide when installing the catalog number
1771-IVN series C input module.
To See page
Important User Information 1
Important Preinstallation Considerations 4
Calculate Power Requirements 5
Key the Backplane Connector 5
Install the Module and Field Wiring Arm 6
Connect Wiring to the Field Wiring Arm 7
For this reference information See page
Intepreting the Status Indicators 10
Harzardous Locations 10
Specifications 11
Because of the variety of uses for the products described in this
publication, those responsible for the application and use of these
products must satisfy themselves that all necessary steps have been
taken to assure that each application and use meets all performance
and safety requirements, including any applicable laws, regulations,
codes and standards. In no event will Rockwell Automation be
responsible or liable for indirect or consequential damage resulting
from the use or application of these products.
Any illustrations, charts, sample programs, and layout examples
shown in this publication are intended solely for purposes of
example. Since there are many variables and requirements associated
with any particular installation, Rockwell Automation does not
assume responsibility or liability (to include intellectual property
liability) for actual use based upon the examples shown in this
publication.
Allen–Bradley publication SGI–1.1, Safety Guidelines for
Application, Installation, and Maintenance of Solid–State Control
(available from your local Rockwell Automation office), describes
some important differences between solid–state equipment and
electromechanical devices that should be taken into consideration
when applying products such as those described in this publication.
Installation Instructions
Contents
Important User
Information
Przeglądanie stron 0
1 2 3 4 5 6 ... 11 12

Podsumowanie treści

Strona 1 - DC (10-30V) Input Module

Publication 1771-IN035B-EN-P - July 2002DC (10-30V) Input ModuleCat. No. 1771-IVN Series CUse this document as a guide when installing the catalog num

Strona 2 - ATTENTION

00010203040506071011121314151617Status Indicators (red)0001020304050607101112131415161711888ĆI DC (10–30V) Input Module10Publication 1771-IN035B-EN-P

Strona 3

Specifications DC (10–30V) Input Module 11Publication 1771-IN035B-EN-P - July 2002Inputs per module 32Module Location 1771ĆA1B thru ĆA4B or later I/O

Strona 4 - Considerations

DC (10–30V) Input Module12Publication 1771-IN035B-EN-P - July 2002Field Wiring Arm 1771ĆWNWiring Arm Screw Torque 9 pound-inches (1.0Nm)Certification

Strona 5 - Key the Backplane

DC (10–30V) Input Module2Publication 1771-IN035B-EN-P - July 2002Reproduction of the contents of this copyrighted publication, inwhole or part, witho

Strona 6 - Field Wiring Arm

DC (10–30V) Input Module 3Publication 1771-IN035B-EN-P - July 2002ATTENTION!Environment and EnclosureThis equipment is intended for use in a Pollutio

Strona 7 - Connecting Wiring to the

DC (10–30V) Input Module4Publication 1771-IN035B-EN-P - July 2002!ATTENTIONPreventing Electrostatic DischargeThis equipment is sensitive to electrost

Strona 8 - I/O Module Groups

DC (10–30V) Input Module 5Publication 1771-IN035B-EN-P - July 2002This module has input filtering to limit the effect of voltagetransients caused by

Strona 9 - ATTENTIO

DC (10–30V) Input Module6Publication 1771-IN035B-EN-P - July 2002!ATTENTIONRemove power from the 1771 I/O chassisbackplane before you install the mod

Strona 10 - Indicators

DC (10–30V) Input Module 7Publication 1771-IN035B-EN-P - July 2002You make connections to the module through the field wiring armcat. no. 1771-WN. Th

Strona 11 - Specifications

DC (10–30V) Input Module8Publication 1771-IN035B-EN-P - July 2002I/O Module GroupsEach module condenses two full module groups (32 inputs) into eachI

Strona 12 - PN 957678-77

DC (10–30V) Input Module 9Publication 1771-IN035B-EN-P - July 2002!ATTENTIONObserve proper polarity with dc power connections.Reverse polarity, or ap

Komentarze do niniejszej Instrukcji

Brak uwag