Rockwell-automation 1794-FLA FlexLogix Controller Installation Instruc Instrukcja Użytkownika Pobierz pdf (Strona 15)

FlexLogix Controller System 15

Publication 1794-IN002G-EN-P - January 2004

Step 5: Install the Extended-Local Adapter (optional)

1. Position the 1794-FLA extended-local I/O adapter on the DIN rail at a 30°

angle and rotate the adapter onto the DIN rail.

2. Press the adapter down onto the DIN rail until flush. The locking tab will

snap into position and lock the adapter onto the DIN rail.

If the adapter does not lock in place, use a screwdriver or similar device to

move the locking tab down while pressing the adapter onto the DIN rail.

Release the locking tab to lock the adapter in place. If necessary, push up on

the locking tab to lock.

3. Ground the adapter. The adapter is grounded through the steel DIN rail and

the common, conductive surface behind the DIN rail. Additionally, use the

grounding stud.

grounding stud

Equipment grounding conductor (ground lug with

2.08 sq. mm [#14 AWG] wire) to ground bus

nuts with captive

star washer

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Brak uwag

Rockwell-automation 1794-FLA FlexLogix Controller Installation Instruc Instrukcja Użytkownika Strona 15