Rockwell-automation 1797-CEC FLEX Ex Bus Isolator and Flexbus Connecto Instrukcja Użytkownika Pobierz pdf (Strona 17)

FLEX Ex Bus Isolator and Flexbus Connector 17

Publication

1797-5.13 - June 2010

2. Strip the +V and -V wires to a length so no bare conductor shows

after inserting the wires into position (+V, -V).

3. If you are using the spring terminals of the plug, insert a screwdriver

into the slot and carefully pry until the spring clamp opens to accept

the wire.

4. Connect either a 1797-TB3 terminal base, a 1794-CE1 cable, or a

1794-CE3 cable onto the FLEX Ex backplane connector of the

1797-BIC module.

Indicators

The 1797-BIC isolator module provides a power indicator to show power has

been applied to the module.

About the Mounting Kit

Use the optional 1794-NM1 mounting kit to mount your system on a panel or

wall without a DIN rail.

ATTENTION

The FLEX Ex backplane connector cover must remain in place until a

FLEX Ex terminal base or cable is connected to the 1797-BIC module.

1794-NM1

Mounting Kit with

18 screws (2 screws for the

adapter and 2 screws for

each module).

30238

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Brak uwag

Rockwell-automation 1797-CEC FLEX Ex Bus Isolator and Flexbus Connecto Instrukcja Użytkownika Strona 17