Rockwell-automation 1797-CEC FLEX Ex Bus Isolator and Flexbus Connecto Instrukcja Użytkownika Pobierz pdf (Strona 7)

FLEX Ex Bus Isolator and Flexbus Connector 7

Publication

1797-5.13 - June 2010

If the module does not lock in place, use a screwdriver or similar

device to move the locking tab down, press the module flush with the

DIN rail and release the locking tab to lock the module in place.

5. Firmly push the module into the adjacent module or terminal base

until the units lock together.

6. To remove the 1797-CEC module, you must work from the right side

and remove one module at a time. To disengage a module from its

neighbor, place a common, flat-bladed screwdriver between the two

modules and turn 1/4 turn to separate the modules.

7. Then slide the module away from its left neighbor, and release the

locking lever to remove the module from the DIN rail.

1797-CEC

42643

1797-CEC

42644

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Brak uwag

Rockwell-automation 1797-CEC FLEX Ex Bus Isolator and Flexbus Connecto Instrukcja Użytkownika Strona 7