Rockwell-automation 2705 REDIPANEL KEYPAD MODULE USER MANUAL Instrukcja Użytkownika Pobierz pdf (Strona 40)

Chapter 7

Programming

7–2

The PLC–5 programming examples given on the following pages are based

on the system configuration listed below.

Note – System configuration may vary for different applications.

1. A 1784–T45 Portable Terminal

2. A 1785–LT PLC–5/15 Processor (Ser. B Rev. H, Set for Scanner Mode)

3. A 1771–P4 Power Supply

4. A 1771–A1B 4 slot chassis

5. A 2705–K11C1 RediPANEL Keypad Module (Ser. B Rev. E)

The DIP switches on the Keypad Module have been set to:

A. Rack 2, Module Group 0

B. 57.6k Baud Rate

C. Destination Bits - Enabled

D. Integer Data Type

E. Last Device

F. Rack Size - 1/2

G. Stored Message and Split Screen - Enabled

H. Keyboard Style - “AT”

I. Dest and SMD Format – Tracking

Prior to entering the sample program into the PLC–5, four messages were

entered into the Keypad Module. The messages are as follows:

MSG.#001 = ”C5.1 ACC.=”

   

    

    

PLC-5 Programming Examples

System Configuration

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 92 93

Brak uwag

Rockwell-automation 2705 REDIPANEL KEYPAD MODULE USER MANUAL Instrukcja Użytkownika Strona 40