Rockwell-automation 2705 RediSTATION Operator Interface User Manual Instrukcja Użytkownika Pobierz pdf (Strona 13)

Publication 2705-UM001A-EN-P

Overview of RediSTATION 1-7

Device Connection

The RediSTATION receives all power and communications through

the DeviceNet cable. A separate power supply is not required. This is

the only external connection to the RediSTATION.

The RediSTATION connects to the DeviceNet network using either the

sealed connector on the top of the unit or the DeviceNet terminal

block inside the enclosure.

DeviceNet Sealed Connector

On standard units, the DeviceNet cable attaches directly to the

DeviceNet connector at the top of the enclosure. The connector is

wired to the DeviceNet terminal block on the circuit board.

DeviceNet Terminal Block

On stations without a sealed connector, DeviceNet cable wires (2

communication, 2 power, 1 shield) connect to the terminal block

through the conduit at the top of the unit.

DeviceNet Connector Pin # Signal Function Color

1 SHIELD Shield Green

2 VDC+ Power Supply Red

3 COM Common Black

4 CAN_H Signal High White

5 CAN_L Signal Low Blue

DeviceNet

Terminal Block

Pin # Signal Function Color

1 COM Common Black

2 CAN_L Signal Low Blue

3 SHIELD Shield Uninsulated

4 CAN_H Signal High White

5 VDC+ Power Supply Red

6 E. GND Chassis Ground Green

DeviceNet Connector

Conduit for DeviceNet Cable

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 63 64

Brak uwag

Rockwell-automation 2705 RediSTATION Operator Interface User Manual Instrukcja Użytkownika Strona 13