Rockwell-automation 2706-LSW DL40 PLUS OFFLINE PROG.SFTWR.USER MANUAL Instrukcja Użytkownika Pobierz pdf (Strona 70)

4–28 Creating Message Files

Publication 2706-6.2

Chain message to another

With this attribute you can link two messages together so that the

second message runs automatically after the Wait Time for the

message has expired. The second message requires no additional

triggering and no special modification of its attributes to respond.

Also, the link is independent of the second message, which means

that the second message can also run independently under other

circumstances.

The second message will have its own attributes, which may be

different from those of the first message. There is no limit to the

number of messages that can be chained together, and messages can

be chained to Special Messages.

Note: The Chain Message to Another attribute is disabled if

AutoRepeat is active.

Activate this attribute by entering a valid message number.

Energize relay

Activating this attribute will display the message and energize the

DL40 message display’s alarm relay whenever the message is

triggered.

Important: The alarm relay will not de-energize even after the Wait

Time for message has expired. The relay will de-energize when:

• a message is run for which the Energize relay attribute is not

activated

• any Special Message runs

• the DL40 message display leaves the Run Mode

Important: AutoClear de-energizes the alarm relay only if the

message which is cleared has the Energize relay enabled.

ATTENTION: Use the relay for annunciator purposes

only. Do not use it for control.

Select Yes to activate or No to deactivate.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 148 149

Brak uwag

Rockwell-automation 2706-LSW DL40 PLUS OFFLINE PROG.SFTWR.USER MANUAL Instrukcja Użytkownika Strona 70