Rockwell-automation 440G-TLS-Z Guard Locking Switch Installation Instr Instrukcja Użytkownika Pobierz pdf

Rockwell Automation 440G-IN012A-EN-P — September 2014

440G-TLS-Z Guard Locking Switch

Installation Instructions (Supplemental)

Original instructions in English

Additional information for escape release and manual release cover versions with separate or fitted key.

Escape release version of TLS-Z power to release —

440G-TZS21UERH

Intended to allow

access through the

guarding (escape) and

not an emergency stop

device.

Meets ISO 14119:2013

Clause 5.7.5.2.

Escape release push.

Mechanical life of 10,000

operations

Max speed of actuation

160 mm/s

Max force 50 N

Minimum distance to release 5 mm (0.2 in.)

When the escape release is operated with the switch in the locked condition and with power

applied the OSSD outputs will turn off and the switch will enter a non-recoverable fault

(4 Hz red flash) requiring a power cycle to reset.

Fitted manual release cover and fitted key —

440G-TZS21URRH

Intended to allow

access through the

guarding from the

outside of the

hazardous area

(Emergency situations)

and not as an

emergency stop device

or for routine manual

access.

Meets ISO 14119:2013

Clause 5.7.5.3.

Ensure the switch is

mounted/protected so as

to prevent accidental

operation.

When the manual release is operated with the switch in the locked condition and with power

applied the OSSD outputs will turn off and the switch will enter a non-recoverable fault

(4 Hz red flash) requiring a power cycle to reset

Ensure the knob is fully rotated back to the locked position before resuming operation.

90°

Fitted manual release cover and separate key —

440G-TZS21UARH

Intended to allow access through the guarding from the outside of the hazardous

area (exceptional situations) and not as an emergency stop device or for routine

manual access.

Meets ISO 14119:2013 Clause 5.7.5.4.

When the manual release is operated with the switch in the locked condition and with power

applied the OSSD outputs will turn off and the switch will enter a non-recoverable fault (4 Hz

red flash) requiring a power cycle to reset.

Ensure the knob is fully rotated back to the locked position before resuming operation and that

key is not left attached.

90°

1 2

Podsumowanie treści

Strona 1

Rockwell Automation 440G-IN012A-EN-P — September 2014 440G-TLS-Z Guard Locking SwitchInstallation Instructions (Supplemental)Original instructions in

Strona 2

Komentarze do niniejszej Instrukcji

Brak uwag

Rockwell-automation 440G-TLS-Z Guard Locking Switch Installation Instr Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Ekwipunek Rockwell-automation 440G-TLS-Z Guard Locking Switch Installation Instr. Rockwell Automation 440G-TLS-Z Guard Locking Switch Installation Instructions (Supplemental) User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Rockwell-automation 440G-TLS-Z Guard Locking Switch Installation Instr