Rockwell-automation 6180P-xxxx Integrated Display Computers with Keypa Instrukcja Użytkownika Pobierz pdf (Strona 30)

30 Rockwell Automation Publication 6180P-UM001C-EN-P - February 2014

Chapter 3 Operation

Keypad Function Setting

The keypad for these computers has two functional settings labeled Set 1 and Set 4.

Start the Computer

Follow these steps to start the computer.

1. Make sure any connected components with separate power supplies (such

as an external display) are turned on first.

2.

Make sure all necessary peripheral devices are connected to the corresponding

I/O ports on the computer.

3. AC powered models: See Connect AC Power

on page 26 for how to

install the AC power cord into the AC power input on the computer.

DC powered models: See Connect DC Power

on page 26 for how to

install DC power to the DC power input on the computer.

4. AC powered models: Plug the AC power cord into a power source or wall

outlet.

DC powered models: Apply 18…32V DC power to the computer.

Function Setting Keypad Encoding

Set 1 DOS applications

Set 4 Default setting for Windows applications

IMPORTANT

The following steps apply to when you must manually start the computer. See

Connect Power

on page 25 for when power is applied to the computer for the

first time.

SHOCK HAZARD: Connect the AC power cord to a power source with an

earth ground to prevent electrical shock. Failure to do so can result in

electrical shock.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 67 68

Komentarze do niniejszej Instrukcji

Brak uwag