Rockwell-automation 6181F_P Series E Integrated Display Computers User Instrukcja Użytkownika Pobierz pdf (Strona 32)

32 Rockwell Automation Publication 6181P-UM002D-EN-P - February 2014

Chapter 3 Operation

Start the Computer

Follow these steps to start the computer.

1. Make sure any connected components with separate power supplies (such

as an external display) are turned on first.

Make sure all necessary peripheral devices are connected to the corresponding

I/O ports on the computer.

3. AC powered models: See Connect AC Power

on page 28 or Standard

Computers on page 28 for how to install the AC power cord into the AC

power input on the computer.

DC powered models: See Connect DC Power to Performance and Non-

display Computers on page 29 for how to install DC power to the DC

power input on the computer.

4. AC powered models: Plug the AC power cord into a power source or wall

outlet.

DC powered models: Apply 18…32V DC power to the computer.

5. Press the computer’s power switch.

See Hardware Features

on page 15 for power switch location.

The computer performs certain actions every time it is started or reset. See

Restart the Computer

on page 33 for what is done.

If your computer does not start or you notice other anomalies, refer to

Troubleshooting starting on page 53

IMPORTANT

The following steps apply to when you must manually start the computer. See

Connect Power

on page 27 for when power is applied to the computer for the

first time.

SHOCK HAZARD: Connect the AC power cord to a power source with an

earth ground to prevent electrical shock. Failure to do so can result in

electrical shock.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 75 76

Brak uwag

Rockwell-automation 6181F_P Series E Integrated Display Computers User Instrukcja Użytkownika Strona 32