Rockwell-automation 6181F_P Series E Integrated Display Computers User Instrukcja Użytkownika Pobierz pdf (Strona 49)

Rockwell Automation Publication 6181P-UM002D-EN-P - February 2014 49

Component Replacement Chapter 4

8. Hold the new riser board by its edge and remove it from its protective

packaging.

9. Align the new riser board with the PCI riser board bracket (E).

10. Secure it with the screws provided with the kit (F).

11. Insert the riser board connector in the onboard expansion slot making sure

the board is properly seated in the slot (G).

12. Tighten the three screws to secure the PCI riser board assembly to the

chassis (H).

If you are installing Then use Secure it with

A two-slot riser board The PCI riser bracket provided with the kit Four screws

A single-slot riser board The default PCI riser bracket Two screws

IMPORTANT

Make sure the mounting bracket does not pinch any cables under the

bracket.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 75 76

Brak uwag

Rockwell-automation 6181F_P Series E Integrated Display Computers User Instrukcja Użytkownika Strona 49