Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 525 D Instrukcja Użytkownika Pobierz pdf (Strona 22)

22 Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013

Chapter 2 Add a PowerFlex 525 Drive to a Controller Project

The Module Properties dialog box for the drive appears.

6. Type a Name for the drive.

7. Type the same IP address for the drive as

the IP address you assigned to the

EtherNet/IP adapter in Configure the

Embedded EtherNet/IP Adapter on

page 16.

8. Click Change.

The Module Definition dialog box appears.

9. In the Module Definition dialog box,

complete the following tasks.

a. From the Drive Rating pull-down

menu, choose the rating for your

PowerFlex 525 drive.

b. From the Electronic Keying pull-

down menu, choose Disable Keying.

c. Click OK.

A message box appears to indicate that the module data types and properties will be changed due to these

selections.

10. Click Yes.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Brak uwag

Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 525 D Instrukcja Użytkownika Strona 22