Rockwell-automation Logix5000 Controllers Produced and Consumed Tags P Instrukcja Użytkownika Pobierz pdf (Strona 17)

Produce and Consume a Tag Chapter 1

10. Click the Status tab to configure the status properties for the consumed

tags.

11. In the Data Type list, click the data type that allows the connection status.

12. Click OK.

Note:

If you consume the tag over a ControlNet network, use RSNetWorx for ControlNet software to schedule the network.

Additional steps for a PLC-5C controller

If you are sharing data with a PLC-5C controller, do the following.

Action Details

In the ControlNet configuration of the

PLC-5C controller, schedule a message.

If the PLC-5C

controller

This Then in RSNetWorx software

Produces Integers In the ControlNet configuration of the PLC-5C controller, insert a Send Scheduled

Message.

Consumes

Integers Do these steps in the ControlNet configuration of the PLC-5C controller.

Insert a Receive Scheduled Message.

In the Message size, enter the number of integers in the produced tag.

REALs Do these steps in the ControlNet configuration of the PLC-5C controller.

Insert a Receive Scheduled Message.

In the Message size, enter two times the number of REALs in the produced tag. For

example, if the produced tag contains

10 REALs, enter 20 for the Message size.

Rockwell Automation Publication 1756-PM011F-EN-P - October 2014 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Brak uwag

Rockwell-automation Logix5000 Controllers Produced and Consumed Tags P Instrukcja Użytkownika Strona 17