Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Instrukcja Użytkownika Pobierz pdf (Strona 21)

Rockwell Automation Publication 1734-UM017B-EN-P - October 2013 13

Install Your POINT I/O or ArmorPOINT I/O Adapter Chapter 2

6. Mount the terminating base shipped with the adapter as the last base in the

backplane instead of the I/O Mounting base shipped with the I/O

module.

Install ArmorPOINT I/O Modules

To install the ArmorPOINT I/O module onto an I/O module mounting base,

1. Using a bladed screwdriver, rotate the keyswitch on the I/O module

mounting base clockwise until the appropriate number for the I/O module

you are installing aligns with the notch in the I/O module mounting base.

2. Position the I/O module vertically above the I/O module mounting base.

The module bridges two I/O module mounting bases.

ATTENTION: If this equipment is used in a manner not specified by the

manufacturer, the protection provided by the equipment may be

impaired.

43787

Mounting hole

Ground lug connection

Keyswitch

Latching

mechanism hole

Terminating Base

Latching mechanism

MOD

NET

1738-OB8EM12/A

24V dc Out

43771

Module Bridges Two Bases

Set keyswitch

position to 4 for the

1738 analog output

modules

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 119 120

Brak uwag

Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Instrukcja Użytkownika Strona 21