Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Instrukcja Użytkownika Pobierz pdf (Strona 74)

66 Rockwell Automation Publication 1734-UM017B-EN-P - October 2013

Chapter 5 Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software

7. In the New Module screen select the Connection tab and verify that the

Requested Packet Interval (RPI) used for the rack-optimized connection

to the I/O modules is appropriate for your system (80.0 ms for this

example). If not, change it to the correct value.

8. Click OK to accept the configuration.

The digital output module appears indented under the local

1734-AENTR/B adapter in the I/O Configuration folder.

Add the POINT I/O Module and Configure For Direct Connection

Add The Digital Sink Output Module

1. Right-click the POINT I/O Chassis in the I/O Configuration folder and

select New Module

The Select Module Type dialog opens.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 119 120

Brak uwag

Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Instrukcja Użytkownika Strona 74