Rockwell-automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardP Instrukcja Użytkownika Pobierz pdf (Strona 42)

Publication 1753-PM001A-EN-P - November 2005

3-2 Create a GuardPLC Project

4. Return to the Project Management window and expand the

project tree until it matches the example below.

When the project is expanded, you can see that it contains a

Configuration and under the Configuration there is a Resource, which

is the actual GuardPLC controller. Under the Resource is the program

TypeInstance that will run on the GuardPLC controller.

Configure the Project and

Hardware

Configure the Controller Resource

1. In the Hardware Management window, expand the project tree

so that the Configuration, Resource, and TypeInstance are

visible, as shown below:

2. Right click [0] Resource and choose Properties.

TIP

You can add an additional controller to the project

by right-clicking Configuration and choosing

New > Resource.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 121 122

Brak uwag

Rockwell-automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardP Instrukcja Użytkownika Strona 42