Rockwell-automation 1756-SYNCH ControlLogix SynchLink Module User Manu Instrukcja Użytkownika Pobierz pdf (Strona 58)

Publication 1756-UM521C-EN-P - July 2004

5-6 Configuring the SynchLink Module

5. When you click on Next, you see the series of wizard screens that enable

you to configure the module.

Although each screen maintains importance during online monitoring,

some of the screens that appear during this initial module configuration

process are blank. They are not shown here.

Click here to move to the next page

Use the pull-down menu, to choose

which axis data tags to transmit

over each axis.

Adjust the Requested Packet Interval

Inhibit the connection to the module

If you want a Major Fault on the Controller to

occur if there is connection failure with the

I/O module while in Run Mode, click here

This Fault box is empty when you are offline.

If a fault occurs while the module is online,

the type of fault will be displayed here. The

fault is a connection fault explaining why a

connection did not open.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 145 146

Brak uwag

Rockwell-automation 1756-SYNCH ControlLogix SynchLink Module User Manu Instrukcja Użytkownika Strona 58