Rockwell-automation 1757-SWKIT5000 Getting Started with ProcessLogix R Instrukcja Użytkownika Pobierz pdf (Strona 12)

12 Getting Started with ProcessLogix R500.1

Publication 1757-QS500A-EN-P - October 2002

Configuring Analog Input Modules

To configure an analog input module:

1. Double-click the IOM with the name LabAI.

This brings up the window for the 6-channel isolated analog input module

(1756-IF6I).

2. On the IOM Configuration window, select the Main tab and enter the following

parameters:

3. Select the Channel Configuration tab and enter the following parameters for all

channels:

4. Click OK.

TIP

In the Project tab, you can see the modules by expanding the branch.

in this field: enter:

IOM Slot Number the slot number containing this module (remember

that chassis numbering begins with 0)

Remote I/O Chassis Mac Address 0 (this indicates module in same rack as controller)

ControlNet Module Slot Number 0

in this field: select:

Input Range 0V to 10V

Notch Filter 60Hz

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Brak uwag

Rockwell-automation 1757-SWKIT5000 Getting Started with ProcessLogix R Instrukcja Użytkownika Strona 12