Rockwell-automation 1757-SWKIT5000 Getting Started with ProcessLogix R Instrukcja Użytkownika Pobierz pdf (Strona 4)

4 Getting Started with ProcessLogix R500.1

Publication 1757-QS500A-EN-P - October 2002

Sample ProcessLogix Configuration

Starting the Software

In this section, we explain how to start:

• The ProcessLogix R500.1 Server software

• Control Builder software

Verifying ControlNet nodes and I/O modules

You should verify the ControlNet nodes and the I/O modules you will use in your system.

For purposes of illustration, we use two ControlNet nodes:

1. ControlNet module with address 1 at slot 0 in the chassis.

To set the node address, adjust the rotary switches on top of the module. See the

schematic on the right side of the module for a guide to selecting the address.

TIP

If the LED on the front of the ControlNet module reads NET ERR,

no other ControlNet devices are present on the network.

1 2 3 4 5 6 7 8 9 ... 23 24

Brak uwag

Rockwell-automation 1757-SWKIT5000 Getting Started with ProcessLogix R Instrukcja Użytkownika Strona 4