Rockwell-automation 1785-ENET PLC-5 Ethernet Interface Module Installa Instrukcja Użytkownika Pobierz pdf (Strona 16)

16 PLC-5 Ethernet Interface Module

Publication 1785-IN019B-EN-P - January 2007

Parts List

Required Tools

The 1785-ENET is a modular component of the 1771 I/O system requiring a properly

installed system chassis. Refer to Universal Chassis I/O Installation Instructions, publication

1771-IN075, for detailed information on an acceptable chassis along with proper installation

and grounding requirements. Limit the maximum adjacent slot power dissipation to 10 W.

Install the Module

Follow these directions to install the module:

1. Attach the connector header to the controller.

2. Connect the module to the controller.

WARNING

If you connect or disconnect the communications cable with power applied to

this module or any device on the network, an electrical arc can occur. This could

cause an explosion in hazardous location installations.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Brak uwag

Rockwell-automation 1785-ENET PLC-5 Ethernet Interface Module Installa Instrukcja Użytkownika Strona 16