Rockwell-automation 1788-CN2DN ControlNet-to-DeviceNet Linking Device Instrukcja Użytkownika Pobierz pdf (Strona 13)

ControlNet-to-DeviceNet Linking Device 13

Publication

1788-IN052D-EN-P - February 2007

Wire a Power Supply to the CN2DN Device

The CN2DN device requires 18...30V dc input power provided by a

power supply that is separate from the DeviceNet network power

supply.

Complete the following steps to wire the power supply to the CN2DN

linking device.

1. Disconnect power to the power supply.

2. Locate the orange power connector.

ATTENTION

To comply with the CE Low Voltage Directive (LVD), power to this

equipment and DeviceNet must be powered from a source compliant

with the following: Safety Extra Low Voltage (SELV) or Protected Extra

Low Voltage (PELV).

To comply with UL restrictions, DeviceNet must be powered from a

source compliant with the following: Class 2 or Limited

Voltage/Current.

ATTENTION

24V dc power connection wiring length must be less than 10 m (32.81

ft).

+ -

Power Connector, Top

Power Connector

+ - + -

Power Supply

Wiring

Terminals

Daisy Chain

to Device

Wiring

Terminals

(Optional Use)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

Brak uwag

Rockwell-automation 1788-CN2DN ControlNet-to-DeviceNet Linking Device Instrukcja Użytkownika Strona 13