Rockwell-automation 20P, 23P PowerFlex DC Drive and SAR Control Circui Instrukcja Użytkownika Pobierz pdf (Strona 16)

Publication 20P-IN004B-EN-P

Step 9: Document the

Change

1. Record the installation of the new control board and date of installation on

the field installed option label on the side of the drive (as shown below).

2. Replace the drive covers in the reverse order of removal as described in Step

3: Remove the Drive Covers

on page 3.

3. Install DPI cable (if present).

4. Down load the parameter configuration back into the drive.

Related Documentation

Allen-Bradley publications are available on the internet at

www.rockwellautomation.com/literature

Frame A Shown

For . . . Read this document

Publication

Number

In-depth information regarding the

operation of PowerFlex Digital DC drives

User Manual - PowerFlex Digital DC Drives 20P-UM001

In-depth information regarding the

installation and wiring of the resolver

feedback option module

Installation Instructions - PowerFlex DC

Drive Resolver Feedback Option Module

20P-IN071

In-depth information regarding the

installation and wiring of the I/O

expansion circuit board

PowerFlex DC Drive Analog and Digital

I/O Expansion Circuit Board

20P-IN002

In-depth information regarding the

installation and wiring of the115V AC to

24V DC converter board

PowerFlex DC Drive 115V AC to 24V DC

I/O Converter Circuit Board

20P-IN003

1 2 ... 11 12 13 14 15 16 17 18

Brak uwag

Rockwell-automation 20P, 23P PowerFlex DC Drive and SAR Control Circui Instrukcja Użytkownika Strona 16