Rockwell-automation 21G PowerFlex 755 Transition Section and Splicing Instrukcja Użytkownika Pobierz pdf (Strona 15)

Rockwell Automation Publication 750-IN027C-EN-P - November 2013 15

PowerFlex 755 Transition Section and Splicing Kit for Floor-mount Drives and CENTERLINE 2100 Motor Control Centers

3. Bring the transition section and MCC column together.

4. Pass the 1/4-20 x 0.5 in. hex-head thread-forming screws from inside the

transition section through the joining holes and engage the screws with the

➊ holes in the MCC column.

5. Pass the 1/4-20 x 1 in. screw from inside the MCC column through the

transition section joining hole

➋ and secure with the 1/4-20 steel nut.

6. Make sure cabinets are level and pushed together tightly.

7. Tighten the screws in a uniform pattern.

IMPORTANT

Do not use hardware to draw cabinets together.

1/4-20

6.2 N•m (55 lb•in)

10 mm

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 25 26

Brak uwag

Rockwell-automation 21G PowerFlex 755 Transition Section and Splicing Instrukcja Użytkownika Strona 15