Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Instrukcja Użytkownika Pobierz pdf (Strona 16)

16 Rockwell Automation Publication IASIMP-QS028A-EN-P - July 2012

Chapter 1 Prepare the PowerFlex 40 Drive Hardware

2. Verify that a jumper is installed

between I/O terminals 01 and 11

on the drive.

The drive ships from the factory

with the jumper installed by

default.

3. If a jumper is not installed, install one before continuing.

4. Remove the terminal block cover to access the power connections.

5. Insert the 120/240V AC, V AC

COM, and chassis ground wires

and tighten the terminal screws.

6. Do not apply power to the drive.

Connect To

120/240V AC R/L1

V AC COM S/L2

Chassis ground

01 02 03 04 05

11 12 13 14 15

V/T2T/L3S/L2R/L1 U/T1 W/T3

BR+ BR-DC-

DC+

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 53 54

Brak uwag

Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Instrukcja Użytkownika Strona 16